DFM Series Guide Rod Aluminum Air Cylinder Tubes
DFM Series Drawing
| NO | d | d1-2 | A | B | C | D | E |
| 1 | φ12 | φ11.5 | 60 | 41 | 28 | 10 | - |
| 2 | φ16 | φ13 | 67 | 46 | 32 | 8.1 | - |
| 3 | φ20 | φ15.5 | 83 | 58 | 36 | 10 | - |
| 4 | φ25 | φ17.5 | 95 | 68 | 44 | 10 | - |
| 5 | φ32 | φ20 | 110 | 78 | 49 | 10 | - |
| 6 | φ40 | φ22.5 | 120 | 88 | 54 | 13.5 | - |
| 7 | φ50 | φ27.5 | 148 | 110 | 64 | 16 | 40.5 |
| 8 | φ63 | φ27.5 | 162 | 125 | 78 | 13.5 | 42 |
Rauemi o te konumohe Alloy Profile Aluminium ngongo pneumatic cylinder: konumohe koranu 6063 T5
Ko te roa o ta maatau paerewa he 2000mm, mena ka hiahia etahi atu roa, tena koa whakamarama mai.
Mata anodized: ngongo roto-15±5μm ngongo waho-10±5μm
Ka rite ki te hoahoa FESTO, SMC, Airtac, Chelic etc.
E ai ki te paerewa ISO 6430 ISO6431 VDMA 24562 ISO15552 etc.
Whakamahia mo te rango paerewa, rango kiato, rango paku, rango rua Roda, rango Kiriata, rango Ripanga Kiriata, Gripper aha hoki etahi rango motuhake.
Hanganga matū:
| Hanganga matū | Mg | Si | Fe | Cu | Mn | Cr | Zn | Ti |
| 0.81 | 0.41 | 0.23 | <0.08 | <0.08 | <0.04 | <0.02 | <0.05 |
Whakatakotoranga:
| Te Kaha Ririhi (N/mm2) | Kaha Tuku (N/mm2) | Maamaa (%) | Maamaa Mata | Tikanga Diamita o Roto | Roto Riro | Te tika | Hapa Matotoru |
| Sb 157 | S 0.2 108 | S8 | HV 300 | H9-H11 | <0.6 | 1/1000 | ± 1% |
Tolerance o Aluminium Alloy Tube:
| TORLERANCE OF ALUMINIUM ALLOY TUBE | ||||||
| Rahi Poka | TORLERANCE | |||||
| mm | H9(mm) | H10(mm) | H11(mm) | |||
| 16 | 0.043 | 0.07 | 0.11 | |||
| 20 | 0.052 | 0.084 | 0.13 | |||
| 25 | 0.052 | 0.084 | 0.13 | |||
| 32 | 0.062 | 0.1 | 0.16 | |||
| 40 | 0.062 | 0.1 | 0.16 | |||
| 50 | 0.062 | 0.1 | 0.16 | |||
| 63 | 0.074 | 0.12 | 0.19 | |||
| 70 | 0.074 | 0.12 | 0.19 | |||
| 80 | 0.074 | 0.12 | 0.19 | |||
| 100 | 0.087 | 0.14 | 0.22 | |||
| 125 | 0.1 | 0.16 | 0.25 | |||
| 160 | 0.1 | 0.16 | 0.25 | |||
| 200 | 0.115 | 0.185 | 0.29 | |||
| 250 | 0.115 | 0.185 | 0.29 | |||
| 320 | 0.14 | 0.23 | 0.36 | |||
FAQ:
Q1: He aha te tauira DFM? A:☆ Ko te paerewa FESTO.Ko te rahi o te kohao mai i te Dia12mm ki te Dia100mm.
Whakatakotoranga:☆ Te taraiwa me te arahi i te waahanga i roto i te whare kotahi
☆ Te ātete ki te taipana me te kaha taha
☆ He aratohu mauri poroporo porohita ranei
☆ He maha nga momo whakaurunga me nga taapiri taapiri
☆ He maha nga momo rereke mo nga tono kua whakaritea
Q2: Mena ka hokona e matou te DFM, ka taea me te anodizing mo te Aluminium 6063 T5 Cylinder Tube?
A: Ko tenei Pneumatic Cylinder kaore i te tūtohu kia oxidized, na te mea me tapahi te kaihoko i a ia ano, ka tukatuka ka mahi i te maimoatanga hāora i muri i te hoko.
Q3: He aha te roa ki te tono matouKo te Konumohe Tangohanga Mo nga Porowhita Pneumatic?
A: 2 mita te roa.
Q4: Whakaaturanga tauira DFM
A: ☆ Ma te DFM taraiwa arataki, ka taea e koe te whakawhirinaki ki te arataki tika me te whakaurunga nui o nga taipana me nga mana taha taha, me te hoahoa pakari, kiato.He pai mo te awhi, te hiki me te aukati i nga tono.
Q5: Wpōtaeko te wa tukumō Profile Aluminium mo te Air Cylinder?
A: ☆ Mena kua whakaritea nga ngongo, me 50-60 nga ra mahi, engari ki te mea mo nga ngongo paerewa, ko te wa tuku he 15-20 ra mahi.
